CCI WB-1 Ink Degradent/Mild Stain Remover
WB-1 is a water soluble ink degradent designed for the removal of all inks, especially tough inks such as: water base, epoxy, UV and enamels.
WB-1 is an effective, non-caustic stain remover of cured stains.
MANUALLY / RE-CIRCULATING
Card excessive ink from screen. Apply WB-1 manually with a sponge, a hand held sprayer, or an air operated spray system. Agitate both sides of the screen with a non-abrasive brush or pad and allow product to penetrate. starting at the bottom of the screen, rinse off all residue with high pressure water. WB-1 can be continuously re-circulated until product becomes too heavily soiled with solids. Used product may be filtered and reused.
Remove the emulsion from the screen. Spray or apply manually to both sides of the screen. Scrub both sides of the screen non-abrasive brush or pad. Allow product to remain on the screen for a minimum of 3 minutes. Starting at the bottom of the screen, high pressure rinse both sides of the screen.
Feel free to live chat with us if you have any questions.